Butterfly valve model WBV1413E-2W-Fb PA-SA 4V320-10 APL-510N-EX 4V320-10 220V AFC2000 is designed for use as shut-off or regulating valves for flow control in heating, water supply systems, in technological processes of food, chemical, oil and gas, pulp and paper and other industries.

PA-SA pneumatic actuators are designed for automation of industrial shut-off valves control process - gates, ball valves. Pneumatic actuators are designed for operation both indoors and outdoors. All internal and external parts are anticorrosive coated.

Pneumatic actuators 4V320-10 220 V are used for control in pneumatic systems having NAMUR docking surface, for installation of actuators through through holes in the housing.

The AFC2000 air treatment unit is designed to clean compressed air from dripping moisture and solid particles, remove condensate, automatically maintain the pressure at a set level, supply lubricant from the tank in the compressed air flow to the elements of the pneumatic system with a large capacity range from 500 liters/minute to 10,000 liters/minute. The lubricator (oil atomizer) adds oil with a viscosity of 32 mm²/s (=cSt) at 40°C to the pneumatic system for further lubrication of control components such as pneumatic cylinders and pneumatic valves.

The APL-510N-EX limit switch unit is an electrotechnical device designed to open and close the working circuit and to visualize the positions of the shut-off body of pipeline valves. In a sealed box, as a rule, there are two mechanical switches designed for voltage up to 250 V, which monitor the position of the actuator stem and signalize in extreme positions. They are mounted on top of the actuator surface. In the upper part of the limit switch unit there is a two-color visual indicator hemisphere. If the connected pipe fitting is closed, only the red part of the hemisphere labeled CLOSED is visible; if it is open, only the yellow part labeled OPEN is visible. This visual indicator is clearly visible from a distance, which simplifies the inspection of the equipment, and the color difference between the open and closed position reduces the probability of misinterpretation of information. Due to the use of the BCV it Weightomes possible to transmit information on the position of pipeline valves (open/closed) to automated control systems, which allows to increase the reliability of the system as a whole and simplifies diagnostics in case of malfunction detection.

Technical parameters of Elephant WBV1413E-2W-Fb-H, body material - cast iron GGG50, disk material - cast iron GGG40, seal - EPDM, with pneumatic actuator with return springs PA-SA, 4V320-10 220V, LSU APL-510N-EX, ATU AFC2000:

Butterfly valves WBV1413E-2W-Fb-H, body material - cast iron GGG50, disk material - cast iron GGG40, seal - EPDM, with pneumatic actuator with return springs PA-SA, 4V320-10 220V, LSU APL-510N-EX, ATU AFC2000

Gate dimensions Elephant Water Butterfly Valve Elephant WBV1432E-2W-Fb-H

Sketch of gates Elephant Water Butterfly Valve Elephant WBV1432E-2W-Fb-H

Materials of parts of rotary disc valves Elephant Water Butterfly Valve Elephant WBV1432E-2W-Fb-H

Sketch of materials for rotary disc valves Elephant Water Butterfly Valve Elephant WBV1432E-2W-Fb-H

Technical data of SA pneumatic actuators with return springs:

SA pneumatic actuators rotary with return springs

Dimensions and mounting dimensions of SA pneumatic actuators with return springs:

Sketch of dimensions of SA pneumatic actuators with return springs

Materials of parts of SA pneumatic actuators with return springs:

Material sketch of SA pneumatic actuators with return springs

Technical parameters of pneumatic valve 4V320-10 220V:

Pneumatic valve 4V320-10 220V

Dimensions and dimensions of pneumatic valve 4V320-10 220V:

Sketch of dimensions and dimensions of pneumatic valve 4V320-10 220V

Characteristics of limit switch unit APL-510N-EX: