Shopping security
Butterfly valves are designed for use as shut-off or regulating valves for controlling flows in heat supply systems, water supply systems, in technological processes of food, chemical, oil and gas, pulp and paper and other industries. The valves are opened and closed by turning the disk by 90°. Opening is performed by turning the handle counterclockwise, closing - clockwise.
Pneumatic rotary actuators with return spring PA-SA are designed for automation of industrial valves control process with maximum torque up to 2128 Nm.
The electropneumatic rotary positioner is used to control pneumatic rotary actuators by means of an electric controller or control system with analog DC output signal range from 4 to 20 mA.
| Name | Significance |
| Nominal pressure PN, bar | 16 |
| Working medium temperature, °C | from -10 to +90 |
| Application | water supply, heat supply |
| Connection to pipeline | Interflange (threaded lugs) |
| Gate type | swivel disk |
| Control type | pneumatic actuator |
| Manufacturer's country | China |

| DN | A | B | C | D | N-M (threaded holes) | The square of the shaft |
ISO 5211 |
| mm | |||||||
| 50 | 72,5 | 130,5 | 43 | 125 | 4-М16 | 9х9 | F05 |
| 65 | 77,5 | 146,5 | 46 | 145 | 4-М16 | 9х9 | F05 |
| 80 | 92 | 156 | 46 | 160 | 8-М16 | 9х9 | F05 |
| 100 | 109 | 168,5 | 52 | 180 | 8-М16 | 11х11 | F07 |
| 125 | 127 | 190,5 | 56 | 210 | 8-М16 | 14х14 | F07 |
| 150 | 141 | 213,5 | 56 | 240 | 8-М20 | 14х14 | F07 |

| № | Details | Material |
| 1 | Body | cast iron QT450 |
| 2 | Disk | stainless steel AISI 304 |
| 3 | Seat seal | NBR |
| 4 | Rod | stainless steel SS 316 |

| № | Part name | Material |
| 1 | Indicator screw | ABS plastic |
| 2 | Position indicator | ABS plastic |
| 3 | Spring clip | stainless steel 304 |
| 4 | Metal washer | stainless steel 304 |
| 5 | Pressure washer | engineering plastic |
| 6 | Housing | hard anodized extruded aluminum alloy |
| 7 | Pressure washer | engineering plastic |
| 8 | Limiter | alloy steel |
| 9 | Shaft sealing ring upper | NBR |
| 10 | Upper shaft sliding ring | engineering plastic |
| 11 | Shaft | nickel plated alloy steel |
| 12 | Shaft sliding ring lower | engineering plastic |
| 13 | Shaft O-ring lower | NBR |
| 14 | Plug | NBR |
| 15 | Seal ring of adjusting screws | NBR |
| 16 | Washer of adjusting screw | stainless steel 304 |
| 17 | Lock nut of adjusting screw | stainless steel 304 |
| 18 | Adjusting screw | stainless steel 304 |
| 19 | Piston | die-cast aluminum alloy |
| 20 | Piston guide plate | engineering plastic |
| 21 | Piston sliding ring | engineering plastic |
| 22 | Piston O-ring | NBR |
| 23 | Spring set | spring steel |
| 24 | Cover O-ring | NBR |
| 25 | End cap | cast aluminum with polyester coating |
| 26 | Cover screw | stainless steel 304 |
| 27 | Stop screw | stainless steel 304 |
| 28 | Adapter | carbon steel |

| Name | Value |
| Control input signal, mA | 4 ~ 20 |
| Internal resistance, Ohm | 250(±15) |
| Input pressure, bar | 1,4~7 |
| Lever travel angle | 0~90° |
| Compressed air connection thread | 1/4″ |
| Pressure gauge connection thread | 1/8″ |
| Cable gland | G1/2″ |
| Protection type | IP66 |
| Compressed air flow rate, l/min | 3 |
| Output air flow rate, l/min | 80 |
| Housing material | aluminum casting |

| Positioner model | YT-1000RSN |
| A, mm | 224.3 |
| B, mm | 166.5 |
| C, mm | 117.5 |
| D, mm | 132.3 |
| E, mm | 6 |
| F, mm | 122 |
| G, mm | 45 |
| H, mm | 45 |
| I, mm | 23 |
| J, mm | 27 |
| K, mm | 32.5 |
| L, mm | 35.5 |
| M, mm | 91.8 |
| N, mm | 37.2 |
| O, mm | 43.5 |
| P, mm | 26.5 |
| Q, mm | 33 |
| R, mm | 80.25 |
| S, mm | 62.5 |
| T, mm | 8 |
| U1, mm | 70 |
| U2, mm | 93 |
| V1, mm | 40 |
| V2, mm | 63 |
| W, mm | 26 |
| X, mm | 32 |
| Y, mm | 9 |
| Z, mm | 24 |

Ships within 48 hours · Estimated delivery Jun 21 - Jun 26
US$40
Get nowSign up to your membership to get coupons up to
15%
Get nowOpportunity to enjoy order discount up to 15% off
Top-Converting Item to Boost Your Average Order