Butterfly valves are designed for use as shut-off or regulating valves for controlling flows in heat supply systems, water supply systems, in technological processes of food, chemical, oil and gas, pulp and paper and other industries. The valves are opened and closed by turning the disk by 90°. Opening is performed by turning the handle counterclockwise, closing - clockwise.

Pneumatic rotary actuators with return spring PA-SA are designed for automation of industrial valves control process with maximum torque up to 2128 Nm.

Pneumatic valve is used to change the direction, start, stop the compressed air flow in the pneumatic system depending on the external control action.

Limit switch unit is an electrical device designed for opening and closing of the working circuit and for visualization of the positions of the shut-off body of pipeline valves. In a sealed box, as a rule, there are two mechanical switches designed for voltage up to 250 V, which monitor the position of the actuator stem and signalize in extreme positions. They are mounted on top of the actuator surface. In the upper part of the limit switch unit there is a two-color visual indicator hemisphere. If the connected pipe fitting is closed, only the red part of the hemisphere labeled CLOSED is visible; if it is open, only the yellow part labeled OPEN is visible. This visual indicator is clearly visible from a distance, which simplifies the inspection of the equipment, and the color difference between the open and closed position reduces the probability of misinterpretation of information. Due to the use of the BCV it becomes possible to transmit information on the position of pipeline valves (open/closed) to automated control systems, which allows to increase the reliability of the system as a whole and simplifies diagnostics in case of fault detection.

Technical parameters of Water Butterfly Valve Elephant WBV1616N-2W-Fb-H, body material - cast iron QT450, disk material - cast iron QT450, seal - NBR, pneumatic actuator PA-SA with return springs, 4V320-08 220V, LSU APL-410N EX:

Butterfly valves WBV1616N-2W-Fb-H, body material - cast iron QT450, disk material - cast iron QT450, seal - NBR, pneumatic actuator PA-SA with return springs, 4V320-08 220V, LSU APL-410N EX

Dimensions and dimensions of butterfly valves Elephant WBV1616N-2W-Fb-H, body material - cast iron QT450, disk material - cast iron QT450, seal - NBR, pneumatic actuator PA-SA with return springs, 4V320-08 220V, LSU APL-410N EX:

Sketch Butterfly valves WBV1616N-2W-Fb-H, body material - cast iron QT450, disk material - cast iron QT450, seal - NBR, pneumatic actuator PA-SA with return springs, 4V320-08 220V, LSU APL-410N EX

Materials of butterfly valves Elephant WBV1616N-2W-Fb-H, body material - cast iron QT450, disk material - cast iron QT450, seal - NBR, pneumatic actuator PA-SA with return springs, 4V320-08 220V, LSU APL-410N EX:

Sketch of parts and materials Butterfly valves WBV1616N-2W-Fb-H, body material - cast iron QT450, disk material - cast iron QT450, seal - NBR, pneumatic actuator PA-SA with return springs, 4V320-08 220V, LSU APL-410N EX

Technical data of SA pneumatic actuators with return springs:

SA pneumatic actuators rotary with return springs

Dimensions and mounting dimensions of SA pneumatic actuators with return springs:

Sketch of dimensions of SA pneumatic actuators with return springs

Materials of parts of SA pneumatic actuators with return springs:

Material sketch of SA pneumatic actuators with return springs

Technical parameters of pneumatic valve 4V320-08 220V:

Pneumatic valve 4V320-08 220V

Dimensions and dimensions of pneumatic valve 4V320-08 220V:

Sketch of dimensions and dimensions of pneumatic valve 4V320-08 220V

Technical parameters of limit switch unit APL-410N EX:

Limit switch unit APL-410N EX

Dimensions and dimensions of limit switch unit APL-410N EX:

Sketch of dimensions and dimensions of limit switch unit APL-410N EX