20% OFF shipping at www.overgamepc.com on orders over $79 + up to 10% OFF products

Ship to:

/ English / USD

New Arrival

Air Freeshipping Best Sellers Nihao Choice

Sourcing

Shipping Calculation

home > Extreme High Pressure Hose 8.6mm OD > Extreme High Pressure Hose 8.6mm OD

Extreme High Pressure Hose 8.6mm OD main image 0

Extreme High Pressure Hose 8.6mm OD main image 1

download picture

description

Report this seller or product

Extreme High Pressure Hose 8.6mm ODFat Adder 8. 6mm grease hose is a high pressure, field adaptable grease hose rated at 280 bar operating pressure and 840 bar burst pressure. The hose is typically used in remote grease line installations up to 18m, and as feeder and secondary grease hoses in automatic lube systems. Four grease hose assemblies are possible with the 8. 6mm grease hose. Reusable Hose Stud Fitting with Screw Sleeve and Compression Fitting Reusable Hose Stud (with Groove)

Shopping security

Each payment you make on thelockerguy is secured with strict SSL encryption and PCI DSS data protection protocols

product description

Why choose thelockerguy wholesale?

Fat Adder 8.6mm grease hose is a high-pressure, field-adaptable grease hose rated at 280 bar operating pressure and 840 bar burst pressure. The hose is typically used in remote grease line installations up to 18m, and as feeder and secondary grease hoses in automatic lube systems. Four grease hose assemblies are possible with the 8.6mm grease hose.

Reusable Hose Stud Fitting with Screw Sleeve and Compression Fitting

Reusable Hose Stud (with Groove) with Screw Sleeve and Push-in Fitting

Reusable 7/16 JIC with Screw Sleeve and 7/16 JIC Nipple

Reusable Swivel with Screw Sleeve Fitting

The Fat Adder 8.6mm grease hose and fittings are interchangeable with common lubrication system grease hoses measuring between 8.3mm and 8.75mm.

Material and Performance

Material and Performance
Outer Diameter	8.5mm - 8.75mm
Inner Diameter	3.9mm - 4.1mm
Inner Tube	Thermoplastic Polyamide 6
Casing	Thermoplastic polyurethane microbial stabilization
	Inner Tube	Casing
Tensile Strength	> 30 N/mm²	> 18 N/mm² (DIN EN ISO 527)
Elongation at Break	> 50%	> 380% (DIN EN ISO 527)
Hardness, Shore	D 60 ±3	A 88 ±3 (DIN EN ISO 868)
Burst Pressure	> 840 bar at 20°C > 450 bar at 60°C	(DIN EN ISO 1402)
Operating Pressure	Max 280 bar
Operating Temperature	-30°C to +80°C	For mediums with "grease with corrosion protection additives": max 60°C
Color	Inner Tube: Natural Casing: Black Reinforcement: White Adhesive: Green - transparent Printing: White	Visual
Bending Radius	≥ 20mm at +20°C
Lubricant for Grease-Filled Hose	EP Lithium-based multipurpose grease	Note: Can be custom filled with grease

Technical Properties

Part Number	Description
HPH8.6	1m x 8.6mm high-pressure hose - empty
HPH8.6GF	1m x 8.6mm high-pressure hose – grease-filled (NLGI 2)
HPH10M	10m x 8.6mm high-pressure hose - empty
HPH10MGF	10m x 8.6mm high-pressure grease hose – grease-filled (NLGI 2)
HPH50M	50m x 8.6mm high-pressure hose - empty
HPH50MGF	50m x 8.6mm high-pressure grease hose – grease-filled (NLGI 2)
HPH100M	100m x 8.6mm high-pressure hose - empty
HPH200M	200m x 8.6mm high-pressure hose - empty

Installation

Prior to installation, ensure all points to be connected to the grease anchor block or lube system accept grease from a grease gun. For installation of an automatic lube system, using a lever grease gun with a pressure gauge (Part number HPTASBLY450G) is recommended.

HPTASBLY450G
High-pressure test grease gun 450g with pressure gauge and relief valve
If using a new machine, fill any existing empty cavities with a suitable grease. If using an empty grease line, ensure this is filled with grease. In this case, a grease-filled hose will be more efficient.
During assembly, cleanliness is important to prevent any ingress of contaminants into the automatic lube system, remote grease line system, or bearing points. Even minor contamination may cause system malfunctions and/or bearing damage.
All grease tubing must be cut square and clean, ideally with a sharp tube cutter (Part number TC).

TC
Cut 8.6mm grease hose safely, squarely, and cleanly using a handheld tube cutter
The end of the 8.6mm grease hose must be lubricated for the screw sleeves prior to assembly.
Screw sleeves must be rotated counterclockwise onto the 8.6mm grease hose until they cannot be turned any further, then backed off by half a turn.
Screw the hose stud all the way into the screw sleeve.
If using either the Reusable 7/16 JIC with screw sleeves and 7/16 JIC nipples or Reusable Swivel fitting with screw sleeve fittings, simply screw the fittings together.
If using a Reusable Hose Stud Fitting with Screw Sleeve and Compression Fittings, either:
1. Install the compression fitting into place by removing the existing grease nipple. Push the hose stud all the way into the compression fitting and tighten the compression nut.
2. Push the hose stud all the way into the compression fitting and tighten the compression nut. Loosen by a quarter turn, remove the existing grease nipple, install the compression fitting, then tighten the compression nut.
If using a Reusable Hose Stud (with Groove) with Screw Sleeve and Push-in Fitting, install the push-in fitting by removing the grease nipple and pushing the hose stud with groove into the push-in fitting.
Check all grease hoses with a grease gun to ensure no blockages or leaks are present.

Extreme High Pressure Hose 8.6mm OD

Name: Extreme High Pressure Hose 8.6mm OD
Brand: www.overgamepc.com
SKU: 44385297126
Price: 648.00 USD
Availability: InStock
Rating: 4.724500000000001 (551 reviews)